Göweil Vario-Master balirka za okrugle bale
Kaunas7410 km to "United States/Columbus"
Ako odlučite kupiti opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavateljem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava tvrtka. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Prije nego što odlučite izvršiti kupnju, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati na skrivene nedostatke ili pokušaj prodavača da počini prijevaru.
Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.
Nemojte davati suglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati pojasniti pojedinosti, zatražiti dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.
Najčešći tip prijevare. Nepošteni prodavatelji mogu zatražiti određeni iznos predujma kako bi "zarezervirali" vaše pravo na kupnju opreme. Dakle, prevaranti mogu prikupiti veliki iznos i nestati, i više se ne pojavljivati.
- Prijenos pretplate na karticu
- Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tijekom komuniciranja prodavatelj postao sumljiv.
- Prijenos na račun "povjerenika"
- Takav zahtjev treba biti alarmantan, najvjerojatnije komunicirate s prevarantom.
- Prijenos na račun tvrtke s sličnim imenom
- Budite oprezni, prevaranti se mogu prikriti iza poznatih tvrtki, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv tvrtke sumnjiv.
- Zamjena vlastitih podataka u fakturi stvarne tvrtke
- Prije prijenosa, provjerite jesu li navedeni detaljie ispravni i odnose li se na navedenu tvrtku.
Kontakti prodavatelja
+370 620 ...
Prikaži
+370 620 34777
+370 620 ...
Prikaži
+370 620 34888
Litvanija 
Poljska, Lublin
Njemačka, Neuenkirchen / Bramsche
Austrija, Redlham
Njemačka, Heinbockel-Hagenah
Njemačka, Bordelum
Njemačka, Albersdorf
2,2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
Njemačka, 48480 Spelle
Njemačka, Roßdorf
Njemačka, Olsberg
Njemačka, Bützow
2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
2,1 m
Njemačka, Hockenheim
2022 model
68253 bales made
Loader
▪ Low profile design, easy trailer or truck loading.
▪ Feeder width - 3.50 m, volume - 13 m3.
▪ Dosing and feeding biters, distributing and evenly transferring the material to the conveyor.
▪ The speed of the feeder's floor chains automatically adjusts and controls the quantity of materials.
Variable press chamber
▪ Two continuous belts ensure extremely high compression.
▪ Roll diameter and roll density can be set by terminal.
▪ Roll diameter range from 0,8 m to 1,40 m.
▪ The speed of the pressing chamber can be adjusted to the material to be pressed by means of a hydraulic drive.
▪ Large chamber bearings, bearing lubrication system.
▪ Re-feed belt: moves along the entire lower length of the machine, picking up loose material and feeding it back onto the conveyor.
▪ Water injection system into the chamber. Allows water to be injected into the dry materials during pressing.
Binding
▪ Grid tying
▪ Binding with film (instead of mesh)
▪ Hydraulically adjustable stop roller.
▪ Automatic control.
Wrapping
▪ 2 wrapping "arms".
▪ 750 mm long film stretcher.
▪ Hydraulic wrapping table.
▪ 4 roll conveyor belts with belt guides.
▪ 2 roll guiding rollers.
▪ Automatic film cutter and add-on device.
▪ Film control.
▪ Single film roll mode.
▪ Hydraulic roll lowering ramp.
▪ Hydraulically lowered film storage (holds 18 films)
film storage capacity of 18 pieces).
▪ LED lighting.
Chassis
▪ Chassis with tandem axle and suspension.
▪ 385/55 R22.5 tyres.
▪ Dual circuit air brake system.
▪ Permissible transport speed up to 80 km/h.
Other
▪ Fully automatic control system PROFI
▪ Automatic chain lubrication system.
▪ Automatic bearing lubrication system.
▪ 4 video cameras.
Technical data:
Minimum power requirement: 140 hp
PTO speed: 1000 rpm.
Weight: 15 900 kg
Length in transport position: 11 780 mm
Length in working position: 14 170 mm
Width in transport position: 2 550 mm
Width in working position: 6 130 mm
Height in transport position: 4 000 mm
Height in working position: 3 540 mm
Used GOWEIL VARIO-MASTER variable chamber baler in very good condition. Machine ready for work.
2022 model
68253 bales made
Loader
▪ Low profile design, easy trailer or truck loading.
▪ Feeder width - 3.50 m, volume - 13 m3.
▪ Dosing and feeding biters, distributing and evenly transferring the material to the conveyor.
▪ The speed of the feeder's floor chains automatically adjusts and controls the quantity of materials.
Variable press chamber
▪ Two continuous belts ensure extremely high compression.
▪ Roll diameter and roll density can be set by terminal.
▪ Roll diameter range from 0,8 m to 1,40 m.
▪ The speed of the pressing chamber can be adjusted to the material to be pressed by means of a hydraulic drive.
▪ Large chamber bearings, bearing lubrication system.
▪ Re-feed belt: moves along the entire lower length of the machine, picking up loose material and feeding it back onto the conveyor.
▪ Water injection system into the chamber. Allows water to be injected into the dry materials during pressing.
Binding
▪ Grid tying
▪ Binding with film (instead of mesh)
▪ Hydraulically adjustable stop roller.
▪ Automatic control.
Wrapping
▪ 2 wrapping "arms".
▪ 750 mm long film stretcher.
▪ Hydraulic wrapping table.
▪ 4 roll conveyor belts with belt guides.
▪ 2 roll guiding rollers.
▪ Automatic film cutter and add-on device.
▪ Film control.
▪ Single film roll mode.
▪ Hydraulic roll lowering ramp.
▪ Hydraulically lowered film storage (holds 18 films)
film storage capacity of 18 pieces).
▪ LED lighting.
Chassis
▪ Chassis with tandem axle and suspension.
▪ 385/55 R22.5 tyres.
▪ Dual circuit air brake system.
▪ Permissible transport speed up to 80 km/h.
Other
▪ Fully automatic control system PROFI
▪ Automatic chain lubrication system.
▪ Automatic bearing lubrication system.
▪ 4 video cameras.
Technical data:
Minimum power requirement: 140 hp
PTO speed: 1000 rpm.
Weight: 15 900 kg
Length in transport position: 11 780 mm
Length in working position: 14 170 mm
Width in transport position: 2 550 mm
Width in working position: 6 130 mm
Height in transport position: 4 000 mm
Height in working position: 3 540 mm